Mensor 6000

TIS Instruments (S) Pte Ltd

Digital Pressure Transducer > MENSOR 6000

MENSOR 6000

Series 6000 Digital Pressure Transducer is a high accuracy
pressure measurement component that uses either
RS-232 or RS-485 to communicate with a host computer
over long distances. Any computer with an available serial
output port can serve as the host controller.
The Series 6000 Transducer is characterized over the full
pressure and temperature range to achieve 0.020% FS
accuracy with 0.006% FS precision. This accuracy
specification includes linearity, hysteresis, repeatability
and temperature errors. Also featured is an output which
is updated at a rate of 50 readings per second.

System designers will appreciate the flexibility offered by
having highly accurate pressure transducers that are not
tied to a front panel and which may be located remotely.
For remote operation the transducer equipped with
RS-485 can be located up to 4,000 feet from the host. A
simple cable can accommodate both the power and the
two-way communications requirements.

    Features
    Flexible/Low Cost/High Accuracy
    0.006% FS Precision
    0.020% FS (15-45 C) Accuracy
    Ranges from 0-1 up to 0-6000 psi
    Resolution to 1 ppm
    Absolute or Gauge Configurations
    Pneumatic or Hydraulic Media
    RS-232 or RS-485 Communications
    Display altitude or air speed
    Fast Response (20ms)
    Remote Operation to 4,000 feet
    Multi-drop Capability
    Compact, Cylindrical Package
    Flexibility for Systems Designer
    316 Stainless Steel Housing
    Customer Assigned Pressure Units
    Dual Range Option
    CE Compliant