Martel MC1200

TIS Instruments (S) Pte Ltd

Multi-Function Calibrator > MARTEL MC-1200

High Accuracy Multi-Function Calibrator

The Martel MC-1200 Multi-Function Calibrator provides
a feature set unmatched in high accuracy, hand-held
calibrators in its price range. The MC-1200 Calibrator
provides the functions and accuracy associated with
fixed-installation, laboratory instruments, and has
everything needed for virtually any calibration task.
Measure and source thermocouples, RTDs, current,
voltage, and frequency, and source pulse trains.

A communications port compatible with Fluke® 700
Series, Mensor®, and Martel pressure modules is
provided, as is an isolated mA/V read-back circuit.
Arrow keys, direct numeric keypad entry, and three
software-driven function buttons, plus a large backlit,
menu-driven graphics display combine to provide a
highly intuitive, simple yet powerful operator interface.

Built-in 250 Ohm resistor for Hart™ compatibility,
compatibility with smart transmitters and PLCs, full
fuseless protection, and a serial communications port
for full control with ASCII commands, are just some of
the additional features that make the MC-1200 the
single, most indispensable tool available for virtually
any calibration task. The MC-1200 is supplied in a
tough, rubber boot; a carrying case is also available as
an option.

       COMMON FEATURES
>>   Measure and source T/Cs (13 types), RTDs (13
       types), Ohms, current, voltage, frequency; source
       pulse trains

>>   Isolated mA/V read-back circuit for complete
       transmitter calibration

>>   Pressure module communication port compatible with
       Fluke 700 Series, Mensor, and Martel pressure
       modules

>>   Built-in 24 V supply can drive 4 – 20 mA loops up to
       1000 Ohms

>>   Direct entry of custom RTD coefficients(RO, A, B, C)

>>   All source modes can be programmed with
       dedicated setpoints to speed calibration and
       linearity tests

>>   Highest accuracy in class to 0.015% of reading

>>   Meets CE requirements and is designed to IEC
       1010 safety standard

>>   Fluke, Mensor, and Martel Pressure Modules

General Specifications:
Voltage Read and Source:	Source	0.000 to 20.000 VDC
	Read	Isolated 0.000 to 30.000 VDC Non-isolated 0.000 to 20.000 VDC
Thermocouple mV:	Read and Source	-10.000 to +75.000 mV
Current (mA):	Source	0.000 to 24.000 mA
	Read	Isolated 0.000 to 24.000 mA Non-isolated 0.000 to 24.000 mA
Frequency (1 to 20 V selectable amplitude):	CPM Source and Read	2.0 to 600.0 CPM
	Hz Source and Read	1.0 to 1000.0 Hz
	kHz Source and Read	1.0 to 10.00 kHz
Pulse (Source only; 1 to 20V selectable amplitude):	Pulses	1 to 30,000.0 2 CPM to 10 kHz
Ohms:	Source Read	5.0 to 4000 Ohms 0.00 to 4000.0 Ohms
Thermocouple Read and Source:	J Thermocouple K Thermocouple T Thermocouple E Thermocouple R Thermocouple S Thermocouple B Thermocouple C Thermocouple XK Thermocouple BP Thermocouple L Thermocouple U Thermocouple N Thermocouple	200.0 to +1200.0 °C -200.0 to +1370.0 °C -200.0 to +400.0 °C -200.0 to +950.0 °C -20.0 to +1750.0 °C -20.0 to +1750.0 °C +600.0 to +1800.0 °C 0 to +2316.0 °C -200.0 to +800.0 °C 0 to +2500.0 °C -200.0 to +900.0 °C -200.0 to +400.0 °C -200.0 to +1300.0 °C
RTD Read and Source:	Ni120 (672) Pt100 (385) Pt100 (3926) Pt100 (3916) Pt200 (385) Pt500 (385) Pt1000 (385) Cu10 YSI400 Cu50 Cu100 Pt385 Pt385-50	-80.0 to +260.0 °C -200.0 to +800.0 °C -200.0 to +630.0 °C -200.0 to +630.0 °C -200.0 to +630.0 °C -200.0 to +630.0 °C -200.0 to +630.0 °C -100.0 to +260.0 °C +15.00 to +50.00 °C -180 to +200 °C -180 to +200 °C -200 to +800.0 °C -200 to +800.0 °C
Environmental:	Operating Temperature	-10°C to +50°C
	Storage Temperature	-20°C to +70°C
	Stability	±0.005% of reading/°C outside of 23 °C ±5°C
	Power Requirements	6 VDC; Batteries 4x AA; alkaline or optional rechargeable
	Physical (includes rubber boot)	Dimensions 8.7"H x 4.2"W x 2.3"D (220.9 x 106.6 x 58.4 mm) Weight 30.5 ounces (863 gms)
	Accessories Included	Test leads, 4-AA alkaline batteries, NIST Certificate, and instruction manual
	Optional Accessories	Carrying Case, Model CC572
Accuracy:	Voltage2	±0.015% of reading, ±2 mV
	Thermocouple	mV ±0.02% of reading, ±10 µV
	Thermocouple Errors (in °C; add 0.2 for Cold Junction Compensation error	RTD Read and Source
	Type J 0.2 °C Type K 0.3°C Type T 0.2 °C Type E 0.2 °C Type R 1.2 °C Type S 1.2 °C Type B 1.2 °C Type C 0.6°C Type XK 0.2 °C Type BP 0.9°C Type L 0.2 °C Type U 0.25 °C Type N 0.4°C	Ni120 (672) 0.2 °C Pt100 (385) 0.2 °C Pt100 (3926) 0.2 °C Pt100 (3916) 0.2 °C Pt200 (385) 0.8°C Pt500 (385) 0.4°C Pt1000 (385) 0.2 °C Cu10 1.4°C YSI400 0.1°C Cu50 0.4°C CU100 0.3°C Pt385-10 1.4°C Pt385-50 0.4°C
RTD IEX-range:		Read	Source
	Current (mA)	±0.015% of reading, ±2 µA	±0.015% of reading, ±2 µA
	CPM	±0.05% of reading	±1 LSD ±0.05% of reading
	Hz	±0.05% of reading	±1 LSD ±0.05% of reading
	kHz	±0.05% of reading	±1 LSD ±0.125% of reading
	Ohms 400 Ohm Range	±0.025% of reading, ±0.05 Ω	±0.025% of reading, ±0.05 Ω
	4000 Ohm Range	±0.025% of reading, ±0.5 Ω	±0.025% of reading, ±0.5 Ω