Martel MC1000

TIS Instruments (S) Pte Ltd

Multi-Function Calibrator > MARTEL MC-1000

High Accuracy Multi-Function Calibrator

The Martel MC1000 Bench Calibrator sets a new
standard in lab calibrator value - the MC1000 features
the accuracy and stability of calibration sources costing
twice as much - and provides useful features no other
calibrator offers in its class!

Despite its world-class performance and powerful
operating features, the MC1000 Calibrator is very
simple to setup and use.

Features
Direct keyboard entry or cursor entry with decade
control.

Superior calibration accuracy.

9 manual/automatic setpoints per output range.

Local or RS232 remote control.

Automatic standby function protects device under
test.

Tellurium copper binding posts reduce thermal
emfs to less than 1 microvolt.

Optional IEEEE-488 control available.

Compatible with Fluke Met/Cal® software.

Optional rack/panel mount kit available.

General Specifications:
Pressure Ranges:	Various ranges in 29 different pressure modules – see Pressure Module Ranges: Specifications
T/C Ranges:	J,K,T,E,R,S,N,B,L,U including -10 to70 mV
RTD Ranges:	Pt 385 (100, 200, 500, 1000 ohms) Pt 392, JIS, Ni120, CU10, YSI400
Ohms Ranges:	0 to 400.00 and 400.0 to 4000.0
mA Range:	0 to 24.000 mA
Voltage:	(Low) Read 0-20.000 VDC Source 0-10.000 VDC (High) Read only 0-250 VDC or VAC
Frequency:	0-1000.0 CPM 0-1000.0 Hz 0-10.00 KHz
Continuity:	0 to 400.0 ohms, audible tone when under 10 ohms
Accuracy:	T/C Type J: ±.3°C ±10 mV (±0.4°C total error) RTD PT100: ±.1°C ±.075 (±0.3°C total error) Ohms (400): ±0.1 Ohms (4000): ±1.0
mA Compliance:	Up to 1000 load
Voltage Drive Capability:	1 mA
RTD IEX-range:	0.01 mA to 3 mA
RTD Frequency Response:	10 mS – works with all pulsed XMTR’s
Oper. Temp:	-10°C to 50°C
Storage Temp:	-20°C to 70°C
Loop Power:	4 AA alkaline batteries, 25 hours typical operating time
Size:	7.5" x 4" x 1.5"