Crystal XP2i

TIS Instruments (S) Pte Ltd

Digital Pressure Gauge/Avionics > Crystal Engineering

The XP2i series are unlike any other digital pressure
gauges. Their looks, performance and construction are
different from anything alse available.

XP2i's are very rugged. The display is protected by a hard
poly-carbonate lens, circuitry is mounted in elastomer (for
shock resistance) and the case and sensor are stainless
steel (providing corrosion resistance and an excellent
barrier to emissions from cell phones, two-way radios and
other electrically noisy equipment.) The case is gasketed
and water resistant per NEMA4 and IP66. A replaceable
filter in the sensor keeps out debris. Unlike mechanical
gauges, XP2i's have the ability to survive large over-
pressure events with no change in calibration.

XP2i's are very easy to use. So simple to use it doesn’t
need or use configuration menus - just buttons. XP2i's can
be calibrated via the keypad or the RS232 port. The display
backlight is one of the best available on this type of gauge.
Combine an XP2i with a (calibration grade) pressure
controller, and you can calibrate XP2i's automatically!

They’re very accurate. XP2i's are rated in percent of
reading - like deadweight testers - but unlike deadweight
testers, they’re not affected by ambient temperature (or
local gravity). XP2i's are fully temperature compensated, so
the accuracy is the same over the entire operating
temperature range, and they can be used to measure
vacuum. Because the rating is “of reading” - one XP2i can
often replace two or more ordinary gauges!

With all these features, you may be surprised that the XP2i
costs less than you might expect - around the same as
other digital gauges, making it an exceptional value.

For more information regarding the Digital IS Test Gauge
contact us.