 | |  | |  | |  | |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
APC300
On-Line Pressure Regulation compensate for Ambient
Temperature effect
Pressure Control Stability to 0.01% Full Scale
Accuracy of 0.025% full Scale (Optional 0.01% Full Scale)
Execute 10 Points Test on a 2000 kpa Transmitter in
Minutes!!!
Temperature Compensated from 0 to 50 Deg C
Built-in Micro-Stepping Pump, do not require external gas
4 Engineering Units
Standard Range -90 to 2000 kpa
Include PC Calibration Software as standard
Specifications____________________
Accuracy Single Range: 0.025% Full Scale
(optional 0.01% Full Scale)
Optional Single Range: -90 to 100, -90 to 200,
-90 to 1000 and -90 to 2000 kpa
Resolution: 5 to 6 Digits depending on Range
Control Stability: 0.01% of Full Scale
Stability Time: less than 15 seconds
Engineering unit: Psi, Kpa, Kg/cm², Bar, mmH2O
Pressure Connection: 1/8" and 1/4" NPT Female
Medial Compatibility: Clean Dry Air
Display: 1/4 VGA Display (320x240 pixels)
Electrical input: 4-20 Milli-amp with Loop Power
Accuracy: 0.05% Full Scale + 1 LSD
Resolution: 0.01 Milliamp
(Optional HP34401A DMM, Resolution 0.001 Ma)
Power Supply: 230 Vac @ 50/60Hz, 4Amp
Unit Size: 280x180x420 mm (<1000kPa),
280x180x540 mm (>1000kPa)
Weight: 12 Kg (<1000kPa), 17 Kg (>1000kPa or <2000kPa)
Note: Accuracy Statement include: Linearity, Hystersis, Drift
and Temperature Range from 0-50 Deg C
Recommended Re-Calibration of the equipment for a period of
1 year.
__Ordering Information___________
Range: APC-300: -90 to 2000 kPa,
(-99.9 kParequire optional external vacuum pump)
Contact Factory for other ranges
Each Unit Include:
1)Power Cord
2)Calibration Certificate
3)Operating Manual
4)Tubing / Fittings (1/4”, 3/8”, ½” NPT Female)
5) Test Leads, RS232 communication cable
6) PC Window-Based Calibration SoftwareTIS
AHC SERIES - Automatic Pneumatic Pressure Calibrator
